- No products in the basket.
ipv 3 Li 165W
£40.00
- Features and Specs:
- Dimensions: 4-1/8″L x 2-1/2″W x 7/8″
- 510 Threaded
- Wattage: 7w – 165w
- Atomizer Resistance: 0.10ohm – 3.0ohm
- Improved Firing Button
- Aluminum Body
- Yihi temperature control chipset
- Redesigned internals
- Takes two 18650 batteries in series (not included)
- Yihi SX330-V3Si Upgradeable chip
- 165 watts upgradeable to 200 watts with a later firmware update
- Touch sensor functionality has returned
- No direct charging capability
Please note: Temperature control requires the use of nickel coils.
Availability: In stock
Compare
Product Description
- Features and Specs:
- Dimensions: 4-1/8″L x 2-1/2″W x 7/8″
- 510 Threaded
- Wattage: 7w – 165w
- Atomizer Resistance: 0.10ohm – 3.0ohm
- Improved Firing Button
- Aluminum Body
- Yihi temperature control chipset
- Redesigned internals
- Takes two 18650 batteries in series (not included)
- Yihi SX330-V3Si Upgradeable chip
- 165 watts upgradeable to 200 watts with a later firmware update
- Touch sensor functionality has returned
- No direct charging capability
Please note: Temperature control requires the use of nickel coils.
Be the first to review “ipv 3 Li 165W”
Related Products
SnowWolf 200W
£50.00Contents:
1 x Snowwolf 200w Plus Box Mod
1 x USB cableFeatures:
Material:zinc alloy
Size:86*47*24.5mm
Output:10-235W
Output modes:VW/TC
Output voltage:0.5-7.5V
Resistance range:0.05-2.5ohm
Support Coils/Wires: Kanthal, NI200, TI, SS, DIY1, DIY2
Temp control range:100-350degree/212-662F
Battery: 2pcs 18650
Firmware upgradeable
Innovative touch buttons
Reverse battery protection
Low voltage protection
High voltage protection
Low resistance protection
Short circuit protection
Overheating protection
Read more
The Brass Monkee 22650
£150.00The Mod Features:
- Three 26650 tubes – Stainless Steel, Copper, and Brass
- Adjustable positive pin
- Includes a tapered cap for 22mm tank
- Magnetic switch
- Silver plated brass contacts
- Reverse threaded locking ring
The RDA Features:
- 4 post design
- Double O Ring
- Heat sink cooling fins
- Slotted AFC hole
- 9mm wide bore drip tip
- 510 adapter for regular drip tips
Mechanical Mod Warning
Mechanical mods are not regulated, and therefore include no short circuit protection for the battery other than ventilation (if ventilation exists in the design of the device). When using mechanical mods, please be sure that you know the dangers of not having circuit protection. Lithium batteries can be volatile and vent or explode, causing injury and damage to property. This can happen if the batteries are not handled properly, if the resistance level of your coils is too low, or in the event of a short circuit. For all mechanical mods we recommend the use of a ‘short fuse’ to shut down the battery from an external short circuit. We recommend using an Ohm reader to check your coils before you start vaping with a mechanical mod to ensure that you are vaping at a safe resistance level. By purchasing and using any mechanical device or lithium battery from our store, you agree to take full liability and responsibility for it’s use. In no way can Central Vape or it’s operators be held liable for any misfortune or harm caused by the use or misuse of this device.
Add to basket
Vaporshark Hexohm
£60.00DESCRIPTION
The 110 watt HexOhm Box Mod V2.1 uses the OKL2-T/20-W12 Chip and supports voltage ranging from 3.3 volts to 6 volts, It is designed to be ran up to 20 AMPs and is rated for 110 Watts of vaping power. THIS MOD ALSO INCLUDES A NEW SPRING LOADED 510 CONNECTION. This is a regulated box mod powered by Dual 18650 wired in Series and features a Spring-Loaded 510 allowing Atomizer to sit flush on the box. Just like the 50 Watt box the 110 Watt box is made out of an aluminum enclosure with a Magnetic Door.
Read more
Reviews
There are no reviews yet.